The following statutes and their accompanying regulations constitute the principal set of national environmental legal requirements in the United States:

• Clean Air Act (CAA) – regulation of air emissions from stationary and mobile sources.
• Clean Water Act (CWA) – regulation of water discharges and quality standards for surface waters.
• Comprehensive Environmental Response, Compensation, and Liability Act (Superfund or CERCLA) – remediation of historic disposal sites.
• Emergency Planning and Community Right-to-Know Act (EPCRA) – emergency planning and notification for hazardous and toxic chemicals.
• Endangered Species Act (ESA) – protection of endangered and threatened species.
• Federal Insecticide, Fungicide and Rodenticide Act (FIFRA) – registration of and controls over pesticides.
• National Environmental Policy Act (NEPA) – requires federal agencies to consider environmental impacts of projects that could significantly impact the environment.
• Oil Pollution Act – prevention of and responses to oil spills.
• Resource Conservation and Recovery Act (RCRA) – regulation of waste management.
• Safe Drinking Water Act – establishes drinking water standards for tap water and rules for underground injection.
• Toxic Substances Control Act (TSCA) – regulation of chemicals and products containing them.
• Hazardous Materials Transportation Act (HMTA)– regulation of hazardous materials in transportation.
• Dodd-Frank Wall Street Reform and Consumer Protection Act – requires disclosures associated with conflict minerals.

Many states have enacted their own, sometimes more stringent and often overlapping, environmental regulatory programs. Some states have also adopted groundwater protection schemes, additional recycling, and extended producer responsibility requirements and state equivalents of NEPA.

Legislation

Integrated Pollution Prevention and Control

The US Environmental Protection Agency (EPA) administers most of the national environmental statutes and regulations, but there is no general system providing integrated pollution prevention and control. State and local authorities generally may impose additional requirements.

Soil Pollution

Superfund’s remediation authorities extend to soil pollution. Most states have adopted similar laws, and have also adopted separate voluntary cleanup and brownfields redevelopment programs that address soil and other media. See "Liability for Damage to the Environment" for more details.

Regulation of Waste

RCRA defines "solid waste" as "any garbage, refuse, sludge […] and other discarded material [...]." For RCRA purposes, solid wastes include solid, liquid, semisolid or contained gaseous material. EPA regulations define "by-product" as "a material that is not one of the primary products of a production process and is not solely or separately produced by the production process." Certain by-products may be considered wastes.

Wastes classified as hazardous wastes, including certain specifically listed wastes and wastes that fail generic characteristics of toxicity, reactivity, corrosivity or flammability, are subject to a cradle-to-grave regulatory scheme, including detailed design and operating standards for treatment, storage and disposal facilities, which generally require state or federal treatment, storage and disposal permits. Substantial litigation and associated regulatory action have occurred with regard to what types of reused, recycled and reclaimed materials are subject to RCRA hazardous waste regulation. Almost all hazardous wastes are subject to stringent treatment requirements (incineration, stabilization) before they may go into a landfill. Universal wastes, including batteries, certain suspended or canceled pesticides, light bulbs and lamps and mercury-containing equipment (states can expand and have expanded this list) are subject to a set of streamlined hazardous waste storage, labeling, and transportation requirements. Municipal solid wastes are generally subject to state transportation and disposal requirements. Imports and exports of hazardous wastes are controlled by RCRA.

Regulation of Air Emissions

The CAA regulates air emissions from stationary and mobile sources. One of the main provisions of the CAA authorizes the EPA to establish National Ambient Air Quality Standards and to regulate emissions of hazardous air pollutants. Most facilities that produce air emissions are likely to be regulated by the CAA and must comply with federal and state level requirements to meet or maintain the National Ambient Air Quality Standards; the latter are implemented through individual state implementation plans. Most new sources of air pollution must obtain pre-construction and operating permits and comply with equipment standards or emission limits that vary based on the type of facility and the type and amount of emissions. Thresholds for permitting and equipment standards are generally more stringent for facilities that emit hazardous air pollutants or that are located in areas with poor air quality. Many larger new sources and modifications to existing larger sources will trigger a New Source Review process that requires pre-construction permitting and best-available pollution control equipment, as well as emissions offsets in areas with poor air quality. Larger sources also have to consider certain greenhouse gas emissions (GHGs) in the New Source Review process. Mobile sources such as vehicles, aircraft, and non-road vehicles and engines, and the formulation and use of fuels, are highly regulated under a variety of standards. Light duty vehicles (ie, passenger cars) and light-duty trucks are subject to tailpipe emission standards that address various air pollutants and GHGs. In addition, the CAA authorizes EPA to regulate fuels and fuel additives used in motor and non-road vehicles and engines if emissions from those products cause or contribute to air pollution that may reasonably be anticipated to endanger public health or welfare.

There are no national rules on the energy efficiency of buildings or plants, but some states and local governments have enacted such rules. The EPA implements a voluntary program known as Energy Star, which provides certifications to buildings and plants recognizing improvements in energy efficiency.

Protection of Freshwater and Seawater

The objective of the CWA is to ensure that Waters of the US are of a quality to be fishable and swimmable. "Waters of the US" is defined as surface waters, including freshwater and marine waters, as well as jurisdictional wetlands. Industrial and municipal discharges of wastewater and designated discharges of stormwater to these waters that pass through a point source are subject to permitting. Discharges of fill material are also subject to permitting. Permits must contain the more stringent of technology-based effluent limitations reflecting uniform national standards or effluent limitations designed to protect the water quality of the specific water body to which the discharge is made. Extraction of water for consumptive use is regulated under state law.

Protection of Natural Spaces and Landscapes

There are several categories of federal lands in the US, established for distinct primary purposes and governed by different federal agencies, including national parks, monuments, and similar sites, natural resource or rangelands, national forests, national wildlife refuges, wild and scenic rivers, wilderness areas, and military lands. The Department of the Interior manages most public lands, including 408 national parks, monuments, battlefields, military parks, historical parks, historic sites, lakeshores, seashores, recreation areas, scenic rivers and trails, and the White House, approximately 245 million acres of public rangelands and the 1.7 billion acres of the Outer Continental Shelf. National parks and monuments are managed in accordance with the goals and standards set forth in the legislation or regulation creating the specific site. Economic development of natural resources is prohibited in most national parks. Public rangelands are managed in accordance with land use plans reflecting principles of multiple use and sustained yield. Wilderness areas are roadless areas (within public lands) designated to be preserved in their natural condition, unaffected by human activities. The Department of Agriculture manages approximately 193 million acres of public land, including national forests. National forests must be administered for multiple uses, including timber production, outdoor recreation, grazing, watershed protection, and wildlife and fish conservation.

Every state also has a system of protected areas within its boundaries that provide recreational opportunities and conservation benefits, and local jurisdictions often own and maintain parks and playgrounds that protect small natural areas and open spaces.

Protection of Flora and Fauna Species

The ESA protects listed endangered and threatened plants and animals and the habitats upon which they depend. The ESA requires each federal agency to ensure that any action it authorizes, funds or carries out does not "adversely impact" any listed species, or "destroy or adversely modify" any critical habitat for that species. The ESA further prohibits anyone from taking a listed species and from engaging in commerce in listed animals or plants or parts thereof. "Taking" is broadly defined to include killing, capturing or destroying habitat. Some states have enacted legislation to protect endangered and threatened plants and animals (in addition to the federal ESA list) within those states.

Noise, Odors, and Vibrations

Noise, odors, and vibrations are primarily regulated, if at all, at the state level, local level or both. Many states have noise pollution programs, although regulatory requirements in this area vary widely. Federal noise regulations cover standards for transportation equipment, air and motor carriers, low noise emission products, and construction equipment, and are enforced by EPA or other designated federal agencies. Workplace exposure to noise, odors, and vibrations is regulated by the US Occupational Safety and Health Administration (OSHA). Under general tort law principles, private parties may bring nuisance actions for excessive noise, odors, and vibrations.

Liability for Damage to the Environment

US law does not establish a single, general regime for environmental damages, but many of the statutes discussed herein contain provisions establishing liability for various types of environmental damage. Superfund is the federal statute that provides for the remediation of hazardous substances released into the environment. Potentially responsible parties (PRPs) liable for remediation under Superfund include entities that arrange or arranged for the disposal of hazardous substances, transporters and current and former owners and operators of contaminated sites. These PRPs may be strictly and retroactively liable for investigation, evaluation and remedial action, which is generally selected by EPA in compliance with the National Contingency Plan. Superfund also provides that federal and state trustees can recover from PRPs the costs associated with the injury to, destruction of or loss of natural resources. In addition, RCRA allows governmental agencies and private parties to seek injunctive relief for imminent and substantial endangerment to the environment. Private parties claiming injury to property from a defendant’s pollution or hazardous activities may seek damages or relief in a tort action.

Environmental Taxes

Most taxes in the US that apply to products and processes having environmental risks are levied at the state or local levels. Among the products and activities taxed by various states are waste disposal, chemicals, petroleum, tires, air emissions, battery disposal, oil spill response, litter control, and water quality.

There are few environmental taxes imposed at the federal level. Under the Oil Pollution Act of 1990, a trust fund established to clean up oil spills if the responsible party fails to do so is financed by a barrel tax collected from the oil industry on petroleum produced in or imported into the US. The Energy Policy Act of 2005 used several tax incentives to support policy goals, including support for alternative energy sources and extended the tax on certain motor fuels to fund the Leaking Underground Storage Tank Trust Fund. There is a federal tax imposed on the use or importation of ozone-depleting chemicals. The abandoned mine land reclamation program under the Surface Mine Control and Reclamation Act is funded by a tax on current production of coal.

Hazardous Activities and Substances

Regulation of Hazardous Activities

Generation, treatment, storage, disposal and management of hazardous wastes are regulated under the cradle-to-grave permit and regulatory management program under RCRA. Transport and handling of hazardous materials are regulated by the Department of Transportation under the HMTA. OSHA sets general industry standards that cover a wide range of activities, as well as specific standards for the construction, maritime and agriculture industries, designed to reduce on-the-job injuries and to limit workers’ risks of developing occupational diseases. Workplace hazards are subject to extensive and specific regulations, including standards for process safety management of highly hazardous chemicals and employee exposure to various air contaminants, asbestos and other substances. There are licensing, training and certification requirements for certain OSHA-regulated activities. Also included among the OSHA standards are requirements that employers provide personal protective equipment and grant employees access to their medical records.

Regulation of Hazardous Products and Substances

All manufacturers (including importers), processors, distributors and users of chemical substances may be subject to TSCA reporting, recordkeeping, and other regulatory requirements. Manufacturing a non-exempt new chemical substance (not on the TSCA inventory) is prohibited unless and until EPA approves a pre-manufacture notification application for the substance, with or without restrictions on the new chemical. Similar notification and review requirements apply to designated significant new uses of hundreds of chemicals. TSCA also gives EPA extensive authority to impose testing requirements or other regulatory restrictions on chemicals, although some of those authorities have been little used. Legislation to overhaul TSCA is currently receiving substantial attention in Congress. Legislation under consideration would provide EPA with much more authority and flexibility to impose significant new requirements on manufacturers of chemicals and those who handle or use chemicals downstream. EPA also is making more aggressive use of its authority under existing TSCA provisions. The Consumer Product Safety Improvement Act of 2008, implemented by the Consumer Product Safety Commission, imposes limitations on the levels of lead and phthalates allowed in children’s products. The Consumer Product Safety Commission also administers the Federal Hazardous Substances Act, which requires precautionary labeling to alert consumers to the potential hazards that certain products present. The Federal Trade Commission has established Green Guides for environmental marketing claims. There are a number of additional requirements imposed by states that regulate and restrict the sale of certain products that contain specified hazardous substances.

Industrial Accidents

Under the general duty clause of the Occupational Safety and Health Act of 1970, each employer is required to provide employees a place of employment free from recognized hazards. OSHA has promulgated numerous specific standards for industrial processes, establishing specific workplace practices as well as imposing training requirements. For instance, OSHA’s process safety management standard addresses hazards from the use of highly hazardous chemicals, and its hazardous waste operations and emergency response standard requires training and control measures for clean-up operations.

EPCRA imposes requirements on facilities to report chemical storage and release information and also requires state and local governments to undertake emergency planning activities. In addition, under the CAA, facilities that produce, handle, process, distribute or store certain chemicals must prepare and submit to EPA a Risk Management Plan. Certain facilities are also required to prepare, develop and implement oil spill prevention, control and countermeasure plans.

Environmental Aspects in Transactions and Public Procurement

Environmental Aspects in M&A Transactions

The three main areas of environmental concern in M&A transactions are regulatory compliance, potential costs associated with onsite remediation at the target’s facilities, and potential liabilities associated with the current and historic generation and offsite disposal of wastes from the target’s operations. The second and third categories are of particular concern because liability under Superfund and some state statutes for onsite remediation and for historic offsite disposal is strict (meaning regardless of fault) and retroactive. Additionally, the continuation of regulatory noncompliance or a failure to address environmental conditions posing a danger to human health and welfare can result in criminal liability.

A purchaser of shares acquires the corporate target with all of its assets and liabilities, including the environmental liabilities identified above. A purchaser of assets may be able to acquire the assets free of environmental liabilities arising from pre-closing regulatory non-compliance by the target and from historic offsite disposal. However, asset purchasers have been held responsible by various courts for these types of environmental liabilities under several theories. Moreover, if the purchaser acquires contaminated real property as part of the assets, under Superfund and many analogous state statutes the purchaser becomes liable for such contamination simply by becoming the owner of the property.

Environmental Aspects in Other Transactions

The three areas of environmental concern identified above are equally important in other transactions. The scope of many environmental laws has been interpreted quite broadly to impose liability on entities beyond the actual owner of a facility or business. For instance, lenders have been held liable in some circumstances for their borrower’s environmental liabilities (although there are some defenses and safe harbors available for lenders). An entity acquiring contaminated real property (whether through a purchase, foreclosure or corporate restructuring) will be liable for the remediation of such contamination, even if the acquirer had nothing to do with the cause. The acquirer may have contractual indemnity or statutory rights of contribution from one or more prior owners, but government enforcement authorities can choose to seek recourse against only the current owner. Transactions involving entities in bankruptcy present unique environmental issues. Environmental claims that continue after a transaction or even after an entity emerges from bankruptcy, such as obligations to correct ongoing non-compliance and to remediate contaminated property, are not discharged as a result of the bankruptcy.

Environmental Aspects in Public Procurement

National regulations require the US government to take into account certain environmentally preferable products in the procurement process. Some state and local governments also have procurement policies that favor environmentally preferable products. Moreover, certain violations of environmental laws may result in a company being suspended or debarred from doing business with the US government. State and local governments have similar suspension or debarment authority.

Environmental Assessment

Activities Subject to Environmental Assessment

Under NEPA, federal agencies must evaluate the potential environmental and socio-economic impacts of all of their own actions and programs. In addition, federal agencies must evaluate the potential impacts of private actions that require federal approval or permitting or that may be supported by federal funding. NEPA covers a broad spectrum of federal actions and is not restricted in any way to purely industrial activities. In fact, many major NEPA documents address the federal government’s natural resource management decisions involving both conservation and resource development. A number of states have comparable laws for environmental impact assessments, although the requirements of these laws vary significantly.

Environmental Assessment Process

NEPA requires a formal environmental impact statement before the initiation of a proposed major federal action "significantly affecting the quality of the human environment." The environmental impact statement includes a general notice of intent with regard to the proposed action and identifies resources or values that would be adversely affected, alternatives and mitigation measures. Initially, a detailed draft impact analysis is prepared and public comments are solicited and considered. A final impact statement is then prepared, that responds to public comments and refines or modifies the proposed action, as appropriate. The adequacy of the final impact statement may be challenged; such judicial challenges can delay proposed projects for years and even effectively terminate them.

The preparation of a less formal environmental assessment is required for minor federal actions. This process involves public comments and participation in various degrees depending on the agency’s standards and practices.

Regulatory Authorities

EPA is the lead federal agency for implementing most of the national environmental statutes. Separate air emission, water discharge and, in some cases, hazardous waste treatment, storage, and disposal permits are required for many industrial operations, with most permits issued by states pursuant to authority delegated by EPA. The Department of the Interior and the Forest Service implement a variety of laws addressing environmental review, wildlife, and cultural and historic resources. The US Department of Justice is responsible for litigating cases arising under federal laws relating to the protection of the environment and natural resources. Each state has at least one agency with responsibility for administering environmental laws and enforcement. As a general rule, there is an overlapping authority, and administration and enforcement of environmental laws are shared between federal and state agencies. States generally take the lead under the CAA, CWA, and RCRA on inspections and enforcement, with EPA retaining significant overfiling enforcement authority with regard to violations of these statutes at individual facilities. In other areas (eg, TSCA, FIFRA, EPCRA), EPA generally takes the lead on enforcement.

Investigation

Although state and federal environmental agencies routinely conduct inspections of regulated facilities, comprehensive governmental investigations are not usually initiated as a result of most regulatory compliance issues. Many compliance issues, whether self-disclosed or identified as a result of an agency inspection, are resolved informally. If agency inspectors identify non-compliance through review of a regulated facility’s records or an onsite inspection, under most circumstances agency personnel initially will discuss the alleged violations with facility personnel. If a regulatory agency initiates a comprehensive or even a limited investigation, it will typically make a site inspection, undertake testing, sampling or similar activities, conduct interviews of facility personnel and prepare a written report and notice of violation identifying the practices or events constituting alleged non-compliance. The facility is entitled to obtain split samples of materials removed by the agency for testing, to retain copies of records requested by the agency and to be represented by counsel throughout the investigation. Environmental agencies also have the power to initiate criminal investigations.

Administrative Decisions

Most administrative decision-making processes are open and allow for participation by interested parties and the general public. The procedural aspects of administrative decision-making vary based on a number of factors, including the agency involved (eg, federal or state), the type of decision (eg, individual permit or variance, enforcement) and the environmental statute under which the decision is made. Some administrative processes are quite formal, under which an administrative law judge makes a decision after a hearing with formal statements, witnesses testifying under oath and cross-examination. Others are more informal and include written submissions (after notice) and a final decision based solely on the written submissions. Although procedures vary, the parties typically may use any type of evidence they deem relevant in administrative proceedings. In many cases, the parties may submit confidential business information under seal to prevent its release to the public, although the submitting party may be required to substantiate the claim of confidentiality.

Sanctions and Remedies

Federal and state environmental statutes authorize a range of civil and criminal penalties for violations, as well as injunctive relief. Penalties are often calculated on a per day, per violation basis (many federal environmental statutes authorize civil penalties of up to US$37,500 per day per violation). Federal and state agencies also can pursue injunctive relief to require the abatement of the violation or environmental harm, such as by requiring the installation of pollution control equipment, the cessation of activity alleged to be in violation of the law and even the shutdown of a facility.

Appeal of Regulators' Decisions

There are appeal mechanisms for virtually all formal administrative decisions from environmental agencies at the federal and state level. The appeal procedures and the entity to which the appeal is made differ by agency, type of decision and the environmental statute under which the decision was made. Appeals can be based on factual findings and legal conclusions and can also challenge the extent of the remedy imposed by the decision-maker. In most cases, a party may appeal the final agency decision (meaning the decision made at the highest administrative level) to a court. As a general rule, courts will allow agency deference in its decision-making, particularly with regard to factual findings.

Judicial Proceedings

Federal and state environmental statutes generally provide that violations will give rise to administrative or civil enforcement proceedings. In addition, these statutes often provide that a party may be prosecuted in a criminal case if that party has committed a knowing, or in some cases even a negligent, violation of the law.

Powers of Court

In civil cases brought by governmental entities, courts are generally authorized to require violators of environmental legal requirements to pay penalties and to undertake injunctive relief to abate the violation or address the environmental impacts of the violation. In a criminal case, defendants found guilty can be ordered to pay a fine and to serve time in prison.

​​​​​​Civil Claims

Certain environmental statutes (eg, CAA, CWA, and RCRA) contain citizen suit provisions authorizing non-governmental entities to sue third parties for injunctive relief for violations. A private party claiming injury from hazardous activities also may seek damages or injunctive relief in a tort action. No contractual relationship among the private parties is necessary, but contracts can create obligations for compliance with environmental laws.

Defenses and Indemnities

Under most federal and state environmental statutes, statutes of limitations (five years is common) apply to limit the time period within which claims of violations of environmental law can be brought. Given the highly specific and complex nature of environmental statutes and regulations, most defenses raised focus on issues of regulatory or statutory interpretation. Factual defenses are available as well. A liable party could have indemnity rights against other parties or be a party to contracts with other parties under which the violator, in turn, may seek recovery, but the violator may not use such indemnities as shields from liability to the government. In Superfund litigation, in which multiple parties can be liable, courts have historically held that liability is strict and joint and several, although recent US Supreme Court case law may have modified those holdings regarding joint and several liabilities. Further, liability under Superfund in most instances is not based on a violation of law, and the statute is applied retroactively to impose liability for historic waste disposal that often occurred many years in the past.

Directors' or Officers' Defenses

Routine environmental regulatory violations do not, as a general rule, give rise to claims of officer and director liability. However, there are various legal theories under which corporate officers and directors can be held personally liable under environmental and other public health laws. For instance, they can be pursued civilly if the corporate veil can be pierced or if they personally participated in the company’s improper activity. Civil liability also may be imposed if a corporate officer exercised substantial control and supervision over a project that resulted in an environmental problem, even if there was no personal participation in the specific improper action. Corporate officers, directors and employees can be pursued criminally if they personally commit a crime, if they aid and abet a crime or if they fail to prevent the commission of a crime by others within the corporation by neglecting to control or supervise the conduct of those subject to their control or fail to implement measures that will ensure violations do not occur. Some federal environmental statutes, including the CAA, specifically state that an operator can include "any person who is senior management personnel or a corporate officer." In addition, a number of reports submitted to EPA and state agencies are required to include formal certifications (under oath) with regard to the accuracy of the information contained therein, and these certification requirements have provided the basis for claims against corporate officers.

Appeal Process

In the federal courts, a judgment from a trial-level federal district court is directly appealable to one of 12 federal circuit courts of appeals. From a circuit court of appeals, a party may petition the US Supreme Court to hear an appeal, but the Supreme Court’s jurisdiction is discretionary. Each of the 50 states has its own court system, but generally, there is a right of review from the trial level to an intermediate appellate court and then to the state’s highest court. In many states, the highest court’s jurisdiction is discretionary. State court systems vary as to the possible levels of appeal, but there are typically two or three levels of appellate courts (although the jurisdiction of some courts of appeal may be discretionary).

International Treaties and Institutions

The US is a party to many international environmental agreements, including various bilateral agreements (eg, the US–Canada Air Quality Agreement), regional agreements (eg, the North American Agreement on Environmental Cooperation between the United States, Canada and Mexico, the UNECE Convention on Long-Range Transboundary Air Pollution and several of its protocols, including the 1998 Protocol on Heavy Metals) and global multilateral environmental agreements (eg, the 1972 Convention on the Prevention of Marine Pollution by Dumping of Wastes and Other Matter, the 1973 CITES Treaty, and the 1987 Montreal Protocol on Substances that Deplete the Ozone Layer). The US State Department maintains a complete list of international agreements to which the US is a party. 

The US is not a party to several significant multilateral environmental agreements, generally for lack of certain domestic authority for which new legislation would be required before the US could join. Treaties in this category include the 1989 Basel Convention on the Control of Transboundary Movements of Hazardous Wastes and Their Disposal, the 1998 Rotterdam Convention on the Prior Informed Consent Procedure for Certain Hazardous Chemicals and Pesticides in International Trade and the 2001 Stockholm Convention on Persistent Organic Pollutants.

International Treaties and Regulatory Policy

With few exceptions, treaties are generally not given direct effect in US law. The US has generally implemented its treaty obligations under environmental agreements through national statutes and regulations. In many cases, this domestic authority has predated the US international obligations and US law and policy make no direct reference to treaties. In other cases, however, the US has enacted new legislation expressly to satisfy international obligations, and US policy under such laws is closely keyed to the developments under international agreements (eg, regulatory policy on ozone-depleting substances and the Montreal Protocol). As a general matter, federal agencies that are responsible for developing, implementing and enforcing US environmental regulatory policy are conscious of US obligations under international agreements, as well as of developments under agreements to which the US is not yet a party.

Updates and Trends

On August 3, 2015, EPA released the final Clean Power Plan (CPP), which imposes carbon dioxide (CO2) emissions requirements on the electric generating industry. The CPP is the most significant US action on climate change at the national level and, if successful, may serve as a model for additional EPA regulation in other industry sectors. The CPP establishes emissions performance rates for existing fossil fuel-fired power plants. The performance rates, calculated to reflect the Best System of Emission Reduction (BSER), are applied to each state’s unique energy mix to calculate a state-specific goal. States must develop plans to achieve their goal at either the individual power plant level or on a state-wide basis.

Under the CPP, the performance rates were calculated using three building blocks. These building blocks are operational efficiency improvements, load-shifting to lower-emitting plants, and increased use of renewable power. Because each state has a different mix of power generation infrastructure and energy programs, targets vary significantly.

States have the flexibility to develop CPP compliance mechanisms and corresponding state implementation plans, which must be submitted to EPA by September 6, 2016, although all states are eligible for a two-year extension, until September 6, 2018. EPA has one year from the date of submittal to approve or disapprove state plans. States that fail to submit an approvable plan are subject to a federal implementation plan issued by EPA, which – as currently proposed – would require those states to participate in a carbon trading program. States must begin implementing their plans in 2022, must meet the interim target based on their average emissions over 2023–2029, and must achieve their final targets by 2030.

The CPP faces several hurdles. Opponents of the CPP argue that EPA lacks authority to regulate existing power plant CO2 emissions under relevant CAA provisions and that even if EPA could regulate such emissions, it has overreached by defining BSER too broadly. It is widely expected that various environmental groups and states will also enter the fray to defend the CPP, and that significant litigation will ensue. The outcome of the 2016 presidential election could alter the CPP. In the face of significant litigation and political risk, the fate of the CPP and climate change regulation in the US remains uncertain. For further discussion of the CPP and related climate change issues, see the United States Climate Regulation chapter.

©2016. Published in Environment & Climate Change Regulation, 2016, by Getting the Deal Through. Reproduced with permission. All rights reserved.